Square Feet to Marla Converter
Convert square feet to Marla using the 272.25 sq ft reference convention. Check whether your document uses a different urban Marla definition.
Square Feet to Marla Converter: Formula and Practical Guide
Convert square feet to Marla using the 272.25 sq ft reference convention. Check whether your document uses a different urban Marla definition.
Square feet ÷ 272.25 = Marla
These calculations use a fixed reference factor for the unit shown on this page. For local land units, the exact definition can vary by state, district, development authority or historical convention. For legal registration or property transactions, confirm the unit shown in the relevant document.
Worked Examples
- Example 1: 1,000 sq ft ÷ 272.25 = 3.6731 Marla
- Example 2: 5,000 sq ft ÷ 272.25 = 18.3655 Marla
Quick Reference Table
| Square Feet | Marla |
|---|---|
| 1 sq ft | 0.0037 Marla |
| 10 sq ft | 0.0367 Marla |
| 100 sq ft | 0.3673 Marla |
| 500 sq ft | 1.8365 Marla |
| 1,000 sq ft | 3.6731 Marla |
Practical conversion check
Under the traditional revenue reference, 272.25 sq ft equals 1 Marla and 5,445 sq ft equals 20 Marlas. This makes the unit useful for comparing older revenue measurements with square-foot property descriptions.
How to verify the source unit
For example, 2,722.5 sq ft ÷ 272.25 = 10 Marlas. If the source is an urban housing scheme, check whether it uses the separate 225 sq ft Marla convention.
Important convention note
The result is based on the 272.25 sq ft traditional revenue definition; it should not be substituted for an urban 225 sq ft Marla without checking the applicable property convention.